Lime Putty Mortar
EasiPoint Lime Putty Mortar (LPM) is a traditional hydraulic pure lime putty produced from high calcium limestone which is fired, slaked and matured for three months, then combined with well graded sands to produce a pumpable mortar.
The mortar is suitable for stone and brick masonry where a soft mortar is required. Adequate preparation and wetting of the substrate is essential, as is compaction and protection of the mortar as work progresses. Specific guidance is available regarding suitable weather conditions and preparation of the mortar prior to use.
Technical Data
| Joint widths: |
Normal 10mm - 25mm |
| Material Classifications: |
not applicable |
| Useable Life: |
In excess of six months if protected from air |
| Initial Set: |
Approximately two days dependent upon conditions |
Typical Compressive Strength at 20°C
28 days 0.3-0.5 N/mm2 |
| Packaging: |
25kg sealed plastic bags |
| Yield: |
14 litres per 25kg bag |
Colour Range
Three colours are available, Bathstone, Pink Sandstone and Yorkstone.
|
