Standard Mortar
EasiPoint Standard is Portland cement based mortar designed to provide a non-shrink, water-resistant gun-injected mortar, suitable for all applications involving sound brickwork or masonry.
It gives a highly durable finish offering high levels of resistance in exposed situations, including areas subject to wind driven rain and sea spay or high level buildings in harsh climates.
The resilience of EasiPoint Mortar has been proven over many years’ use in a broad variety of locations, from coastal structures to city centres. A sulphate-resistant version is also available for areas subject to heavier than normal levels of pollution.
EasiPoint Mortar is available in ten standard colours carefully chosen to complement the natural stone and brick tones predominating throughout the UK.
Where a particular colour is required for a special project or larger application EasiPoint is available colour matched to specification.
Standard EasiPoint holds independent Assured Datasheet Approval from the British Board of Agrément (BBA ADS 019/99).
Technical Data
| Joint widths: |
Normal 5mm - 15mm (Max. 25mm) |
| Typical Performance (all at 20°C) |
| Useable Life: |
45 minutes |
| Initial Set: |
2 ½ hours |
| Water Resistance: |
Initial Surface Absorption
ISAT after 10 minutes 0.53ml/m2/sec
ISAT after 30 minutes 0.45ml/m2/sec
ISAT after 60 minutes 0.26ml/m2/sec |
| Chloride: |
Less than 0.002%. Complies with
DpT Specification 2601 |
| Yield: |
14 litres per 25kg bag |
EasiPoint Mortar is a pre-packed mixture of specially selected raw materials, factory blended in accurate proportions under a Quality System conforming to the European Standard BS EN ISO 9001:2000. The mortars give consistent performance and colour and are formulated specifically for gun-injection.
EasiPoint Standard Mortar exceeds the properties of a Class 1 mortar as defined in BS5628 Part 3. Raw materials used in its manufacture are: high grade Portland cement complying with BS12; selected silica sands and natural aggregates complying with BS1200, together with additives to provide water resistance, thixotropy, workability and colour. Coloured mortars contain pigments complying with BS1014.
Colour Range
 |
 |
| Black |
Dark Grey |
 |
 |
| Light Grey |
White |
 |
 |
| Dark Brown |
Light Brown |
 |
 |
| Red Brick |
Sandstone |
 |
 |
| Natural |
York Stone |
Colours displayed are representative only and subject to the limitations of the photographic and printing processes. To ensure that the colour selected meets your requirements, please request a material sample from your EasiPoint technical representative prior to ordering.
|
